Free South Greenland Kayak Plans
We may earn commissions if you shop through the links below.
The South Greenland kayak, Figure 208 in the Bark Canoes and Skin Boats of North America
This kayak seemed easy to model. The chines and low deadrise faired directly into the stems. On other kayaks, it takes extra time to model the transition between a hard chine pressing through the skin and an area of free-floating skin. I rounded the deck instead of modeling in deck beams, because it’d be easier to build with cedar strips. Like the rest of the models in my Free Winter Canoe and Kayak Project, I drew lines for building with 3/16-inch strips. Unlike the rest of the models, I drew the stems offset from the stations. Because the stems are so long, it forced me into a larger paper size, so instead of leaving lots of empty space, I used the space to unclutter the stations.
On a side note, Björn Thomasson used this kayak as the basis for his wildly popular Black Pearl. Deciding between the two would be a tough choice. Build a kayak known as excellent or risk building the original and take part in some experimental archeology.
Specifications
Length: 19 feet 6 inches
Width: 20-1/4 inches
Kayak and Canoe Building Books
You’ll need instructions if you want to build this kayak. These are the books to buy.
- The Strip-Built Sea Kayak: Three Rugged, Beautiful Boats You Can Build: If you only buy one book, then buy this one. Nick Schade instructs you on all the processes of building a kayak.
- Building Strip-Planked Boats: This is a must have because it updates lots of the techniques found in The Strip-Built Sea Kayak. This book includes new topics not found elsewhere , including using hybrid fabrics and wood dyes.
- Kayakcraft: Fine Woodstrip Kayak Construction: If you have the money, then get this. It shows a different way to build a kayak.
For more, check out my canoe and kayak building books review.
Get the Drawing Package or Free Kayak Plans Downloads
The free kayak plans are study plans with the stem and stations appearing on one drawing. The drawing package includes the full-sized study plan and each station and stem drawn separately on a PDF that prints full sized on ARCH D size paper (nestings). You can cut these out and glue them to plywood to cut full-sized forms. A pdf of the electronic drawing package. is available for this kayak. You can print the file on 24- by 36-inch paper on your own.
5 Comments
toon
I’m loving the lines on this one. Might use it to base my first build on these. Am i reading the drawings right with the green lines being “framework” and the black lines as outside hull?
Bryan Hansel
Black line is outside of the hull and the green line is inside of hull if the hull is 3/16″ thick.
toon
It took a few months, but yesterday I hade the first trial-sailing with my design based on these drawings! And boy is she fun to paddle around in!
Toon
I’ve converted the drawings from strip build to skin-on-frame, which was a lot of fun to build!!
Bryan Hansel
I’d love to see pictures. Got a link to a set online? If you send some, I’ll write a post about your boat.