With the fiberglassing finished on the bottom of the kayak, I flipped the kayak over and started in at the Layback Lounge. If you recall from the now many previous chapters of this building log, I needed to do a cockpit recess to get the back coaming height down to a level that would allow layback rolls. Although not as low as many Greenland kayaks, nor as long as some low volume kayaks, I wanted to get the lip down to about 8 to 8.5″. To do this, I had to make a huge recess in the kayak. Designing the kayak for a recess like this allows a good amount…