-
Building Ken Taylor 1959 Kayak – the Igdlorssuit – Part Four
Cockpit Coaming (8 Hours) There are many methods of building a cockpit coaming and making a carbon fiber coaming is certainly one of the hardest, but it is an achievable project for the home builder. I like to build mine in four steps. The first step is to make the foam mold that will be used to produce the coaming. Make sure that your opening is sanded smoothly and looks fair. Check this fairing with the cockpit cutout template used to make the recess. Any type of foam can be used to form a coaming, but I used expanding spray foam, because it was what I could get in town.…
-
Building Ken Taylor 1959 Kayak – the Igdlorssuit – Part Five
Control Box – 1 Hours The control box for the skeg is built much the same way as the deck fittings. A four and a half inch slot is cut into the hull. It’s located near the center of the coaming. A foam mold is inserted into the slot and covered with paste wax and mold release. Then thickened epoxy is used to round the corners and 5 layers of 3.2 ounce tight weave glass is used to lay-up the control box. After the box is finished, drill a hole to insert the tubing. I covered the hull around the skeg control box with packing tape, so I would be…
Or if you use a RSS Feed Reader subscribe via our RSS Feed.